Helical Anchors

helicalHelical Anchors

Helical screw-in anchors are a quick, simple and reliable means of creating secure fixing points in the ground. Manufactured from galvanised steel, they consist of an anchor shaft with an angled disk at the lower end. The upper end of the shaft, depending on usage, has either a closed eye for cable or chain connections or is threaded for securing plates and nuts.


Installation is either by hand or by powered augering but requires no large or expensive equipment. The achievable holding capacity is dependent upon the ground conditions but with the correct anchor in the right conditions holding capacities of up to 50kNs are attainable.

As the anchors are screwed in they can, when not in use, be unscrewed for re-use at other locations.

With their ease of operation, helical anchors are ideal for confined spaces and avoid damage both to the soil structure or crops and to nearby structures and can be loaded to their full capacity immediately after installation.

Anchor Selection

The length and diameter of the shaft and the diameter and thickness of the anchor disk are dependent upon the anchor’s purpose, the screw-in depth and the required holding capacity. Anchor Systems can advise on the most suitable type and size of anchor but will require information on its intended use, loading capacity and the ground conditions present.

TSS are the sole agent for all Anchor System products in Jersey.  To find out more please click on the digital brochure below, contact us on 01534 514904 or via email at infopack@tssjersey.co.uk
View all our Downloads